Hi, Evorybody
I Will Tell You Some Computer Terms, First I Will Share The Commands You Can Write On The Wİndows Command System "cmd"
Some Windows Commands :
rmdir = Deletes the existing or completely empty file.
sfc = Scan or replace important Windows files.
cipher / w: c = Deletes files that cannot be deleted on the drive.
driverquery = Used to open the driver list to find the incorrectly installed driver.
shutdown / r / o = Used to open Advanced Startup Settings after sending a res to the computer
shutdown -l = Used to log off the current user.
shutdown -f = Close the currently open applications.
shutdown -s = serves to shut down the computer after 30 seconds.
shutdown = Used to shut down the computer.
narrator.exe = It is used to open the voice reader.
logon.exe = Used to restart Windows.
eudcedit.exe = Utility for font generator.
nslookup.exe = It is used to find the IP address of which network is connected.
C: \\ WINDOWS \\ system32 \\ tsshutdn.exe = Allows the computer to shut down in 60 seconds.
C: \\ WINDOWS \\ system32 \\ webfldrs = It is used to setup dialogs on the computer.
C: \\ WINDOWS \\ system32 \\ attrib.exe = .dll, .exe etc. in the computer. Displays the files.
netstat -n = Displays addresses and port numbers numerically.
netstat -an = Shows the IP address of the sender when receiving the file.
netstat -a = Show all links.
netstat -b = Displays the executable files associated with each link.
netstat -e = Displays Ethernet statistics.
netstat -o = Used to show the process ID with each connection.
netstat -p = Used to show the connections of the protocol.
netstat -r = Serves to show the routing table.
netstat -s = Displays statistics for protocols.
winver = shows the information of the Windows version.
ing ip = It is used to measure the connection by pinging other computers connected to the same IP.
pathping = It is used to check the connection speed between the modem and the computer.
ipconfig = It is used to show the IP address of the network that the computer is connected to.
ipconfig / all = Shows the IP address and all other statements on the network that the computer is connected to.
ipconfig / all> algulweb.txt = Writes all IP information to a text file named algulweb.txt.
ipconfig / registerdns = It is used to save the name and IP address of the computer in DNS.
ipconfig / renew = Used to renew the IP address on the network to which the computer is connected.
comexp.msc = Enables component services.
certmgr.msc = Used to open the Certificates screen.
eventvwr.msc = Open the event viewer screen.
services.msc = Used to open the Services screen.
cladv.msc = Used to open indexing services screen.
dfrg.msc = Used to open the disk defragmenter feature screen.
secpol.msc = Used to open the local security screen.
perfom.msc = Used to open the performance screen.
calc.exe = Used to open the calculator.
diskmgmt.msc = Used to open disk management.
devmgmt.msc = Used to open the device manager.
dfrg.msc = Used to open the disk defragmenter.
eudcedit.exe = It is used for creating characters.
appwiz.cpl = It opens the add and remove programs screen.
access.cpl = It is useful to open the available options.
accwiz.exe = Used to open the available options wizard.
desk.cpl = It is used to open the image properties.
eventvwr.exe = Used to open the event viewer.
freecell.exe = Used to open the playing card game.
fsmgmt.msc = Used to open the shared folder menu.
I Will Tell You Some Computer Terms, First I Will Share The Commands You Can Write On The Wİndows Command System "cmd"
Some Windows Commands :
rmdir = Deletes the existing or completely empty file.
sfc = Scan or replace important Windows files.
cipher / w: c = Deletes files that cannot be deleted on the drive.
driverquery = Used to open the driver list to find the incorrectly installed driver.
shutdown / r / o = Used to open Advanced Startup Settings after sending a res to the computer
shutdown -l = Used to log off the current user.
shutdown -f = Close the currently open applications.
shutdown -s = serves to shut down the computer after 30 seconds.
shutdown = Used to shut down the computer.
narrator.exe = It is used to open the voice reader.
logon.exe = Used to restart Windows.
eudcedit.exe = Utility for font generator.
nslookup.exe = It is used to find the IP address of which network is connected.
C: \\ WINDOWS \\ system32 \\ tsshutdn.exe = Allows the computer to shut down in 60 seconds.
C: \\ WINDOWS \\ system32 \\ webfldrs = It is used to setup dialogs on the computer.
C: \\ WINDOWS \\ system32 \\ attrib.exe = .dll, .exe etc. in the computer. Displays the files.
netstat -n = Displays addresses and port numbers numerically.
netstat -an = Shows the IP address of the sender when receiving the file.
netstat -a = Show all links.
netstat -b = Displays the executable files associated with each link.
netstat -e = Displays Ethernet statistics.
netstat -o = Used to show the process ID with each connection.
netstat -p = Used to show the connections of the protocol.
netstat -r = Serves to show the routing table.
netstat -s = Displays statistics for protocols.
winver = shows the information of the Windows version.
ing ip = It is used to measure the connection by pinging other computers connected to the same IP.
pathping = It is used to check the connection speed between the modem and the computer.
ipconfig = It is used to show the IP address of the network that the computer is connected to.
ipconfig / all = Shows the IP address and all other statements on the network that the computer is connected to.
ipconfig / all> algulweb.txt = Writes all IP information to a text file named algulweb.txt.
ipconfig / registerdns = It is used to save the name and IP address of the computer in DNS.
ipconfig / renew = Used to renew the IP address on the network to which the computer is connected.
comexp.msc = Enables component services.
certmgr.msc = Used to open the Certificates screen.
eventvwr.msc = Open the event viewer screen.
services.msc = Used to open the Services screen.
cladv.msc = Used to open indexing services screen.
dfrg.msc = Used to open the disk defragmenter feature screen.
secpol.msc = Used to open the local security screen.
perfom.msc = Used to open the performance screen.
calc.exe = Used to open the calculator.
diskmgmt.msc = Used to open disk management.
devmgmt.msc = Used to open the device manager.
dfrg.msc = Used to open the disk defragmenter.
eudcedit.exe = It is used for creating characters.
appwiz.cpl = It opens the add and remove programs screen.
access.cpl = It is useful to open the available options.
accwiz.exe = Used to open the available options wizard.
desk.cpl = It is used to open the image properties.
eventvwr.exe = Used to open the event viewer.
freecell.exe = Used to open the playing card game.
fsmgmt.msc = Used to open the shared folder menu.
Son düzenleme: