ping 192.168.0.2 ⇒ To the other computer on the IP send in small data packets, tests the connection by taking it.
ping -a 192.168.0.2 ⇒ To the other computer on the IP send in small data packets, tests the connection by taking it. The parameter "-a" displays the address of the computer in the IP.
ping -a -n 20 192.168.0.2 ⇒ "-n" öğesinin yanındaki değer, veri paketleri gönderilerek test edilir.
pathping ⇒ This command is used to test whether data passing through the Routers has been lost.
ipconfig ⇒ Shows the ip address of the computer on the network.
ipconfig /all ⇒ Shows the computer's IP address on the network and many extras.
ipconfig /all > egemen.txt ⇒ Assigns all spilled information to the "egemen.txt" file.
ipconfig /release ⇒ Ağdaki bilgisayarın IP'si.
ipconfig /renew ⇒ Refreshes the computer's IP on the network.During the regeneration process, the "release" process is first followed by the "renew" process.
ipconfig /registerdns ⇒ Used to save the computer name and IP to DNS.
ipconfig /fushdns ⇒ Deletes the information for name and IP address matches that DNS clits store in cache memory, discharges cache memory. (Used to resolve problems)
ipconfig /displaydns ⇒ If the computer you are using is also a DNS client, Displays the IP addresses in the DNS Cache memory and the DNS names that belong to them.
arp -a ⇒ Shows the IP resolution in Cache. Cache If a new IP is within 2 minutes he'll clean himself up if he doesn't have a solution. If it is renewed within 2 minutes, it will be held for another 10 minutes.
arp -s 192.168.0.2 00-02-44-12-24-ad ⇒ In IP analysis, The IP secures the "mac" address of the given computer. Cache remains continuous, not deleted.
net use ⇒ Displays the map(s) on the computer.
net use h: \\\\client98\\c ⇒ Client 98 map the C of the computer to H.
net use h: \\\\192.168.0.2\\cş ⇒ Map the IP to the hidden admin sharini h of the given computer
net use lpt1: \\\\server\\ibm /persistent ⇒ Provides a permanent printer connection.
netstat⇒ Shows the connections to the computer.
nbtstat ⇒ Enables data on the NetBIOS API to be displayed on the TCP/IP. Setbios the name table is both for the (local) computer you are using and the other one on the network allows display for computers (remote).
A few commands that might help there will be more as soon as possible..
Good Lessons...
ping -a 192.168.0.2 ⇒ To the other computer on the IP send in small data packets, tests the connection by taking it. The parameter "-a" displays the address of the computer in the IP.
ping -a -n 20 192.168.0.2 ⇒ "-n" öğesinin yanındaki değer, veri paketleri gönderilerek test edilir.
pathping ⇒ This command is used to test whether data passing through the Routers has been lost.
ipconfig ⇒ Shows the ip address of the computer on the network.
ipconfig /all ⇒ Shows the computer's IP address on the network and many extras.
ipconfig /all > egemen.txt ⇒ Assigns all spilled information to the "egemen.txt" file.
ipconfig /release ⇒ Ağdaki bilgisayarın IP'si.
ipconfig /renew ⇒ Refreshes the computer's IP on the network.During the regeneration process, the "release" process is first followed by the "renew" process.
ipconfig /registerdns ⇒ Used to save the computer name and IP to DNS.
ipconfig /fushdns ⇒ Deletes the information for name and IP address matches that DNS clits store in cache memory, discharges cache memory. (Used to resolve problems)
ipconfig /displaydns ⇒ If the computer you are using is also a DNS client, Displays the IP addresses in the DNS Cache memory and the DNS names that belong to them.
arp -a ⇒ Shows the IP resolution in Cache. Cache If a new IP is within 2 minutes he'll clean himself up if he doesn't have a solution. If it is renewed within 2 minutes, it will be held for another 10 minutes.
arp -s 192.168.0.2 00-02-44-12-24-ad ⇒ In IP analysis, The IP secures the "mac" address of the given computer. Cache remains continuous, not deleted.
net use ⇒ Displays the map(s) on the computer.
net use h: \\\\client98\\c ⇒ Client 98 map the C of the computer to H.
net use h: \\\\192.168.0.2\\cş ⇒ Map the IP to the hidden admin sharini h of the given computer
net use lpt1: \\\\server\\ibm /persistent ⇒ Provides a permanent printer connection.
netstat⇒ Shows the connections to the computer.
nbtstat ⇒ Enables data on the NetBIOS API to be displayed on the TCP/IP. Setbios the name table is both for the (local) computer you are using and the other one on the network allows display for computers (remote).
A few commands that might help there will be more as soon as possible..
Good Lessons...